Application conditions and heat conduction process of laser welding fin tube

-
In order to understand the application conditions of laser welded stainless steel finned tube, it is necessary to understand the heat transfer process and definition when operating. The heat transfer of the whole equipment refers to the process of heat transfer from hot fluid to cold fluid through solid wall, and also includes the heat transfer process of the tube wall. The strength of the heat transfer process and the size of the heat transfer mainly depend on the characteristics of the convective heat transfer on both sides of the wall.
The greater the temperature difference required for laser welding of stainless steel finned tube to transfer unit heat, the greater its thermal resistance will become, and its thermal resistance is equal to the reciprocal of the heat transfer coefficient, indicating that the greater the heat transfer coefficient is, the smaller its thermal resistance is, which is the best one for laser welding of stainless steel finned tube, on the contrary, the smaller the heat transfer coefficient is, the greater its thermal resistance will be. The heat transfer coefficient of the air side is smaller than that of the water side, so the heat resistance of the air side is larger than that of the water side, which becomes the main heat resistance affecting the heat transfer, making the air side become the bottleneck of the heat transfer process, limiting the improvement of the heat transfer.
https://szmurphy.en.alibaba.com/product/62418895942-811592052/Murphy_Copper_fin_tube_laser_welding_heat_exchanger_Laser_Welded_Finned_Tubes_heat_exchange_for_Solar_Water_Heating.html?spm=a2700.icbuShop.41413.22.53e16a21uPLge5

https://szmurphy.en.alibaba.com/product/62419848232-811592052/Murphy_Stainless_steel_electric_boiler_laser_welding_heat_exchanger_Laser_Welded_Finned_Tubes_heat_exchange_for_Steam_generator.html?spm=a2700.icbuShop.41413.39.53e16a21uPLge5

In order to reduce the thermal resistance of the air side and overcome the bottleneck effect of the air side, many measures may be taken in the design of the heat exchanger. The effective choice is to add fins on the outer surface of the air side, that is, to use the fin tube. The finned tube greatly expands the original heat exchange area of the air side. The stainless steel laser welded finned tube supplier Murphy makes up for the low heat exchange coefficient of the air side and greatly improves the heat transfer.
The application field of laser welded stainless steel finned tube is expanding constantly, and its product types and specifications are increasing day by day. In order to facilitate the design and production of finned tube heat exchanger during the operation, the finned tube needs to be classified during the operation. The finned tube can be roughly divided into four types from the combination of use and structure: finned tube for heat exchange with air , fin tube for heat exchange with flue gas, organic medium and refrigeration medium, and fin tube for heat dissipation of electrical components.
The laser welded finned tube can be divided into bimetal composite rolled finned tube, integral rolled aluminum finned tube, stainless steel laser welded finned tube, spiral wound finned tube, L-shaped finned tube and plate finned tube according to its manufacturing process.

评论

发表评论

此博客中的热门博文

Everything you should know about U bend tube

-
图片
  Murphy can make  U bend tube  in our factory according to customer requirements. The elbow is heat treated according to the customer’s requirements, and then hydrostatic pressure test and dye penetration test are performed as needed. U-shaped elbows are widely used in  heat exchanger  systems. Heat exchanger equipment based on stainless steel U bend tube plays an important role in the nuclear industry and petrochemical machinery manufacturing. U bend tube heat exchangers are specially designed for high temperature applications, especially steam condensing or hot oil systems. When the differential expansion makes the fixed tube-sheet heat exchanger unsuitable, and in some cases the floating head type (HPF) cannot be selected, the U bend tube heat exchanger will be selected. The surface of the finished U-shaped elbow should be free from scale and scratches after bending. Dimensional tolerance U-bend pipes are in accordance with relevant regulations of TEMA R.C.B...
阅读全文

EVERYTHING YOU CAN KNOW ABOUT HEAT EXCHANGER

-
图片
  A heat exchanger is a device designed to transfer heat between two or more fluids with different temperatures (ie liquid, vapor or gas). Depending on the type of heat exchanger used, the heat transfer process can be gas-to-gas, liquid-to-gas or liquid-to-liquid and takes place through a solid separator that prevents fluid mixing or direct fluid contact. Other design features, including building materials and components, heat transfer mechanisms, and flow configuration, also help to classify the types of heat exchangers available. After discovering applications in a wide range of industries, we designed and manufactured a variety of heat exchange equipment used in heating and cooling processes. This article focuses on heat exchangers, exploring various available designs and types, and explaining their respective functions and mechanisms. In addition, this article outlines the selection considerations and common applications of each type of heat exchange equipment. Heat Exchanger t...
阅读全文

How to Optimize the Design of Finned Tube Phase Change Heat Storage

-
图片
  Finned tube structure Finned tubes are widely used in power, chemical and other industries. Many spiral heat transfer surfaces or threaded tubes can be regarded as finned tubes. It has a significant effect on expanding the heat transfer area and promoting turbulence, and it has a great effect on both single-phase-convection heat transfer and phase-change convective heat transfer.  The structure of the finned tube heat exchanger is basically the same as the general shell and tube heat exchanger. Just use finned tubes instead of light tubes as the heat transfer surface. Finned tube heat exchangers are also often used to heat or cool the gas outside the tube, and steam or water is passed through the tube, such as air coolers, boiler economizers, radiators, etc.   Finned tube material The finned tube has a wide range of materials, including stainless steel, carbon steel, titanium and copper alloys, etc. The corrosion resistance of the industry has greatly increased. Laser w...
阅读全文