Sterilization temperature and development requirements of stainless steel finned tubes

-
When the stainless steel finned tube is used, pay attention to the position of the scale when the finned tube is pressed back. During the operation, the rubber gasket shall not be pressed excessively, so that the ring ratio reduces the service life of the gasket.
When replacing the rubber gasket of the stainless steel finned tube, Murphy experts suggest that the laser welded stainless steel finned tube needs to renew all the segments in the process of operation, so as to effectively avoid the uneven gap between the segments, which will directly affect the heat transfer effect.
https://szmurphy.en.alibaba.com/product/62414268795-811592052/Murphy_Aluminum_gas_boiler_laser_heat_exchanger_Laser_Welded_Finned_Tubes_heat_exchange_for_Heat_recovery_steam_generators.html?spm=a2700.icbuShop.41413.11.4da46a21ReV6B6

https://szmurphy.en.alibaba.com/product/62414734126-811592052/Murphy_Copper_industrial_electric_boiler_laser_heat_exchanger_Laser_Welded_Finned_Tubes_heat_exchange_for_Water_Heaters.html?spm=a2700.icbuShop.41413.17.4da46a21ReV6B6


Now with the continuous development of its industry in China, its steel finned tube radiator for heating and heat exchange is gradually emerging to a certain extent, and constantly stands out. When it is used, its standard model structure is mainly composed of steel frame and heat emission tube. The heat emission tube is made of steel tube spiral wound fins, and then by three-dimensional hot galvanizing workers in all directions The utility model has the advantages of good air tightness, compact structure and convenient installation. 
The stainless steel finned tube can be divided into series finned tube (sleeve tube), tension wound finned tube, inserted finned tube, non dead angle rolling finned tube, cast finned tube, laser welded composite finned tube according to its processing in the process of operation, which includes high frequency welded finned tube, submerged arc welded finned tube, etc.

评论

发表评论

此博客中的热门博文

Everything you should know about U bend tube

-
图片
  Murphy can make  U bend tube  in our factory according to customer requirements. The elbow is heat treated according to the customer’s requirements, and then hydrostatic pressure test and dye penetration test are performed as needed. U-shaped elbows are widely used in  heat exchanger  systems. Heat exchanger equipment based on stainless steel U bend tube plays an important role in the nuclear industry and petrochemical machinery manufacturing. U bend tube heat exchangers are specially designed for high temperature applications, especially steam condensing or hot oil systems. When the differential expansion makes the fixed tube-sheet heat exchanger unsuitable, and in some cases the floating head type (HPF) cannot be selected, the U bend tube heat exchanger will be selected. The surface of the finished U-shaped elbow should be free from scale and scratches after bending. Dimensional tolerance U-bend pipes are in accordance with relevant regulations of TEMA R.C.B. and ASTM A566 and ASTM
阅读全文

CLASSIFICATION OF HEAT EXCHANGER ACCORDING TO THE HEAT TRANSFER MATERIAL, SURFACE SHAPE AND STRUCTURE

-
图片
1. Metal material heat exchanger Common materials are carbon steel, alloy steel, copper and copper alloy, aluminum and aluminum alloy, titanium and titanium alloy. Because the thermal conductivity of metal material is large, the heat transfer efficiency of this kind of heat exchanger is high. 2. Non-metallic material heat exchanger Commonly used materials are graphite, glass, plastic, ceramics, etc. Because of the small thermal conductivity of nonmetallic materials, the heat transfer efficiency of this type of heat exchanger is low. Often used in corrosive systems. hashtag www.murphyfinnedtubes.com 1. Tube heat exchanger A heat exchanger that conducts heat through a tube wall. It can be divided into shell heat exchanger, coil heat exchanger, tube heat exchanger, fin heat exchanger and so on. 2. Plate heat exchanger A heat exchanger that conducts heat through a plate surface. According to the structural form of heat transfer plate can be divided into plate type, spiral plate
阅读全文

Spiral plate heat exchanger equipment quality problems.

-
图片
Spiral plate heat exchanger equipment can be broken down, mostly because of quality problems. Compared with the heat transfer surface of other heat exchangers, the heat transfer surface of this heat exchanger is quite thin, that is, 0.5mm, and the allowable high corrosion degree is 0.05mm/ year. The material of common spiral plate heat exchanger equipment usually USES alloy material (304 or 316), 304 is the low cost of austenitic stainless steel, has the ability to resist corrosion to a certain range of organic matter, but the ability to resist hydrochloric acid and sulfuric acid is weak. Spiral plate heat exchanger equipment can be broken down, but also because of its own maintenance problems. Spiral plate heat exchanger equipment is an important component of heat exchange technology in process industrial equipment. The resilient gasket that seals between the various helical fins is a vulnerable part and also an easily aged part under natural conditions. Its service life has an impo
阅读全文