What factors should be mastered in laser welding of stainless steel finned tubes?
What factors do finned tubes need to master? Although it is said that with the laser welding of stainless steel finned tubes, people don't need to worry too much about the heating factors, but they still need to master some factors to better use.
Many users will feel that the installed steel plate radiator can not meet the room temperature requirements, which is the concern of many winter heating users. So what factors will affect the indoor heating temperature? Murphy suggests as follows:
1. Do not install a heating cover during decoration, so as not to affect the heat dissipation effect of the heating. If the heating cover has been installed and can not be removed, it is necessary to open the cooling cover. If the opening will affect the beauty, the cooling cover can be inverted, and the louver net can be used upward, so that the heat in the heating cover can be emitted.
2. In the early stage of heating, most of the non heating phenomenon is caused by air blockage, because at the beginning of heating, the pipeline is actually a mixture of water and air. Incomplete air discharge will cause air blockage and affect water circulation. The public should pay attention to heating in time. 3. Ensure ventilation for 2 to 3 times a day for 5 to 10 minutes each time. When ventilation, all doors and windows should be opened to realize air exchange in a short time. If the window is opened for a long time and a half, not only the ventilation effect of the fin tube is not obvious, but also the heat will be lost, especially when the radiator is under the window, this kind of waste will be more serious.
3. In the early stage of heating, most of the non heating phenomenon is caused by air blockage, because at the beginning of heating, the pipeline is actually a mixture of water and air. Incomplete air discharge will cause air blockage and affect water circulation. The public should pay attention to heating in time. 3. Ensure ventilation for 2 to 3 times a day for 5 to 10 minutes each time. When ventilation, all doors and windows should be opened to realize air exchange in a short time. If the window is opened for a long time and a half, not only the ventilation effect of the fin tube is not obvious, but also the heat will be lost, especially when the radiator is under the window, this kind of waste will be more serious.
4. Low water supply temperature of heating pipe network will cause low temperature of radiator.
5. Due to the interior decoration and the change of the house structure, the room area changes; the change of heating facilities, such as changing the location of the radiator, increasing the area of the radiator, changing the heating mode of the radiator, covering the radiator, etc., will change the operating conditions of the heating network, affect the radiator heat dissipation, cause heating imbalance, and even affect other households in the unit building.
6. The indoor pipe network is in disrepair for a long time, and the rust and scale in the pipe are blocked, which will seriously affect the hot water circulation, causing the indoor temperature not to go up, especially the first floor.
After the detailed introduction of the finned tube, we know more about the relevant information and Murphy hope to help you better.
评论
发表评论