Measures to quickly reduce dangerous factors in the use of heat transfer oil radiators.

 Heat transfer oil radiator (to reduce the heat generated by equipment operation) is a relatively common equipment in the industry in recent years, but we also know that some large industrial equipment will have some unsafe factors in use, which will cause us to Degree of damage. The air heater is an electric heating device that mainly heats the gas flow. The heating element of the air heater is a stainless steel electric heating tube, and the inner cavity of the heater is equipped with multiple baffles (baffles) to guide the gas flow direction and extend the residence time of the gas in the inner cavity, so that the gas is fully heated and the gas Heating evenly and improving heat exchange efficiency. The heating element of the air heater is stainless steel heating tube, which is made of seamless steel pipe with electric heating wire, and the gap is filled with magnesium oxide powder with good thermal conductivity and insulation. When the current passes through the high-temperature resistance wire, the heat generated is diffused to the surface of the heating tube through the crystalline magnesium oxide powder, and then transferred to the heated air to achieve the purpose of heating. 

The air heat exchanger is used to transfer heat from the hot fluid. It is an industrial application of convective heat transfer and heat conduction to the cold fluid to meet the specified process requirements. Heat exchangers can be classified in different ways. According to its operation process, it can be divided into three types: partition type, hybrid type, and heat storage type (or heat recovery type); according to the compactness of its surface, it can be divided into compact type and non-compact type. In order to avoid this insecurity When the phenomenon occurs, what measures should we take (pointing to the solution to the problem)?

If the heat conduction oil radiator (to reduce the heat generated by the operation of the equipment) encounters the following phenomena in use, we need to pay special attention to it and solve it in time. The heat conduction oil radiator's heat pipe is overheated, which will cause the heat conduction oil radiator pressure to be too high. The furnace pipe will also rupture, and the heat conduction oil will leak, which will cause the equipment to explode. If it encounters a fire, it may cause a fire. In our process of using the heat transfer oil radiator, an accident may lead to leakage.

Whether it is the overheating of the heat transfer oil radiator heat pipe or the damage of the hydraulic sealing element, it is easy to find, but we often do not take measures (pointing to the solution of the problem) and ignore it directly. The equipment is very easy to happen over time. explosion. For our safer use, we must pay special attention.