Fin heat exchanger cleaning

You will need to keep the fin heat exchanger clean every once in a while. You will find that you are able to keep it clean and take care of it with proper maintenance and cleaning, the longer it will make it last longer, which will be the better job.

Step 1 Open

The first thing you will do is open the lid of the air cooler. Due to the cooling process of the air cooler, fresh air from outside circulates throughout the office or home. Every air cooler is different, so unless you have to open it before, you may need to look at the instructions and check to see exactly how to do it. Improper doing so may cause damage to your evaporative air conditioner.

Step 2 Check

The air in your room will never be out of date. This even allows you to enjoy a free operating unit, even if the doors and windows are open. After the cooler has been turned on, it is a good idea to take the pad and double check. If they want to be in good condition without debris or molds, then they will have to be replaced. 

Make these judgments before moving on to the next step. If it does need to be replaced, then make sure you get the correct measurement, so the size you get is a usable one.

Step 3 Float valve

Take a good look at your float valve and make sure it does not stick at all. If you find it, then you will need to get cleaned up. The moisture that the air cooler injects into your indoor air uses the cooling and evaporation technology. This enhanced moisture content can prevent the sun from getting out of your skin and eyes due to the heat. Many times, you will find that hard water deposits and debris are the main reason why you have a problem. If you don’t think that something clean can solve this problem, then it’s something else, and you might want to consider replacing everything.

Step 4 Belt

Make sure you check the belt on the fan. It can be very loose because this thing may cause problems. Please make sure it is tight and only slightly push when moving. If the belt moves too much, then it will need to be replaced.

Step 5 Oiling  

It is a good idea to oil the motor parts to ensure that it can run smoothly and longer, not to mention quiet.

Step 6 Cleaning

After you have done the proper inspection, you are ready to start cleaning. At first you will be panned and scrubbed with hard water until all the stains are gone. Make sure they are all cleaned before putting it back. Look inside, there must be a lot of dust anywhere, if there is, then scrub them until they are all washed away. 

Once you are done, you will only need to simply replace the necessary parts, it is best to put them back together to complete. Now, if you are running the air conditioner, you don’t have to be surprised when you receive high electricity bills. Detector air coolers are cost-effective and efficient devices that run on air conditioners with considerably less power. 

In fact, they are not only cost-effective operations, but they can also be maintained for long hours. In addition, they are quite cheap to install and all they need is minimal maintenance. They definitely consume less electricity compared to A/C units.

For more details please check here